How to Replace a UPVC Door Replacement Lock
If your door lock is becoming stuck or isn't working as it should, it's time to think about replacing it. It may seem like a complicated process but it's actually quite straightforward and doesn't require a locksmith.
A few tools of the trade along with a bit of patience and plenty of attention should suffice. Here's how:
Measure the Door
It's possible to replace your uPVC doors if you are having difficulty locking them or if they don't close. If you've recently moved into a new property, or a tenant has moved out without returning keys, or your multipoint gearbox is showing signs of wear and tear, switching the barrel on your lock to an entirely new one will offer an extra layer of security.
You'll need to take measurements prior to buying an entirely new lock. This will ensure that the new lock will fit properly and not affect the security of your home. The most crucial of these is the backset. It is the distance between the centre of your keyhole bore hole to the edge of your door. It's usually 2 3/8 or 2 3/4 inches. Use an measuring tape or ruler to measure this, and then record the results on paper or a notepad.
You should also know what the faceplate thickness is. This is the measurement of the part that covers the mechanism of the lock. If you can, buy a replacement lock from the same manufacturer, because they'll be made to the same dimensions. If you cannot find the manufacturers name or mark, simply determine the width of the current cylinder. You can also verify this by putting a pencil in the keyhole and measuring from the end of the lock up to the centre of the pencil mark on each side of the cylinder.
Once you have the measurements you can begin removing the old cylinder. Begin by loosening the screw that holds the handle in place using a Phillips-head driver. Then, loosen the screws holding the handles on the exterior and interior to each other. Once these have been removed, you are able to take off the barrel screw on the exterior handle and remove the cylinder.
If the cylinder has become stuck in the lock, try using WD-40 or another lubricant to help get it out. It's important to not push it out with forcible turns could cause damage to the internal gearbox and lead to more problems with the lock. Consider upgrading to a lock with anti-snap and anti-bump security. This will make it more resistant to attacks from thieves.
Source the Lock
If you're replacing an old lock following a burglary or upgrading to improve security, there are a few things to consider when choosing a new door lock. To ensure quality and fit ensure you purchase the correct size cylinder and from a trusted manufacturer. You'll also require a few basic tools for the job, including tape measure, screwdriver and rubber mallet.
There are a variety of signs that your lock made of upvc is worn out and requires to be replaced. The most common signs are visible damage to the lock or a handle that's loose and isn't fitting properly. If the lock is jamming or isn't locking at all, it's time for a replacement.
After you've chosen the best lock, it's important to install it correctly so that it functions correctly and locks securely. Follow the manufacturer's directions when installing the multipoint lock mechanism inside the upvc panel. Attach the proper faceplates, handles and other components. Once everything is installed Test the mechanism by locking and unlocking the door from both inside and outside. When you've finished the job and are happy with the results, it's time to have celebration.
Changing a upvc door lock may seem daunting however, it's an easy DIY task that is done without the need of the assistance of a locksmith. By recognizing the indicators that your lock is ready to be replaced and having the necessary tools available it's relatively easy to complete.
Be aware that a lock made of upvc could benefit from lubrication just like any other moving part. A few sprays or graphite powder can help prolong their lifespan by reducing excessive friction. Regular cleaning of your door lock mechanisms with WD-40 as well as a damp cloth can help to keep them in great condition.
Remove the Cylinder
If you're experiencing issues with your doors made of plastic and windows, it could be time to change the barrel on your lock. This is an easy DIY project and can be done in just a few minutes. It's also an effective method of maintaining your home security. This requires you to determine the brand of the lock in order to locate the appropriate replacement.
A door lock that isn't working properly can be a real pain, not to mention an extremely security risk. Locks on uPVC door are prone to malfunction, so it is crucial to check them regularly. Experts suggest changing your lock every seven to eight years. However, if your lock is suffering from severe damage or you're unhappy with its performance, it's worth considering professional help from an expert.
In the majority of cases, a simple pin-based system known as a euro cylinder is used for uPVC doors. They are easy to use and are not likely to break down however they can be susceptible to attack. In the end, it's worth replacing your lock cylinder with one that is more modern and has anti-snap and anti-bump protection to prevent burglary.
The first step in changing your uPVC locks is to take off the handle. This will expose the old cylinder. It's not easy because screws are usually concealed beneath the handles. Make sure you have a screwdriver on hand. You'll then want to gently pull and move the cylindrical until it is loose. Once it loosens then you can pull it out of its socket.
When you have found the right replacement then simply screw it into place and reverse the removal process. It is important not to tighten the lock too much as this could cause the cylinder in the door to get stuck and stop working as it should. Once everything is back in place check the uPVC door lock by opening and closing it both inside and outside. It should be able to lock and unlock the door using your key. If not, ensure that the screws are tightened, then try again.
Install the Lock
You'll need to do some research to make sure the lock you select is the right one for your door. You'll need to be aware of the faceplate and backset measurements - which is the distance from the edge of the door to the center of the handle or cylinder - and the type of lock you choose to ensure that the new lock is fitted correctly without compromising security.
After replacement upvc door locks www.repairmywindowsanddoors.co.uk 've completed this, it's time to install the new lock. Ideally, prop the door open or secure it so that it doesn't close during the process. The first step is to loosen the screws that hold the handle in place by using a Phillips-head screwdriver. After that, you should be able to pull the handle's inner and outer apart.
It is now possible to remove the old cylinder using a screwdriver. it. Once you've removed the cylinder, you'll be able to install your replacement lock, making sure that you follow the directions for your specific model. Once the lock is installed, you can test it by shutting and opening the door from both the inside and the outside, and locking and unlocking it from inside and then trying it again.
There are a variety of reasons to consider to change the locks on your uPVC door. It could be that you've recently moved in and don't have a key, the previous tenant did not return it, or you might just want to upgrade to an extra secure lock. Whatever the reason, changing the lock cylinder is easy and shouldn't take more than five minutes.
Whether you have a multipoint lock or single-point lock, they all work with the same basic mechanism. This means that they can be prone to problems from time to time that could result in them not being able to close or becoming stuck. These issues can be caused by weather conditions or wear and tear or simply the use of everyday. The majority of these issues can be easily corrected with a little maintenance or by hiring locksmiths.